Sweetheart Valentine Treat Holder Two Ways

I have seen this style of treat holder all over Pinterest and Facebook over the last few years. I do not know what the exact name of this style of treat holder is. The base is a rectangle with an interlocking tab closure. Here is my version done in two ways.

Both ways to create this treat holder use partial cutting - whether it be with a punch or with a framelit. Partial cutting is a way to only cut the areas or sections of the shape. In this case, the partial cutting creates closure tabs on either end of the treat holder base.

The first way to create this treat holder is with the retired Sweetheart Punch. The Sweetheart Punch was recently back on the Clearance Rack. It was very popular and sold out before I could publish this post.

Start by cutting a 1-9/16" by 5-1/4" piece of Fresh Fig cardstock. With the 5-1/4" edge along the top of the Simply Scored Scoring Tool, score at 3/4" and at 2-1/8". Then rotate the cardstock 180 degrees. Score again at 3/4" and at 2-1/8". Alternatively, score at 3/4", 2-1/8", 3-1/8", and 4-1/2".

The tab closures are made by punching only the top of the heart. To do this, insert one of the 1-9/16" edges into the Sweetheart Punch from the bottom to the top of the punch instead of from the side and punch. Punching the heart this way keeps the heart shape attached to the treat holder base.

Then rotate the treat holder base 180 degrees and punch the other 1-9/16" edge.

The treat holder base should now look like this.

Next, cut along one of the 3/4" score lines about half way across the treat holder base from the right side. Then cut along the other 3/4" score about half way across the treat holder base from the left side.

Cut two 1-7/16" by 1-1/4" pieces of Whisper White cardstock, two 1-3/8" by 1-1/8" pieces of Painted with Love Designer Series Paper, one 1/2" Whisper White circle, one 1" square piece of Melon Mambo cardstock, and one 2-1/2" by 3/4" piece of Whisper White cardstock.

Adhere the Painted with Love Designer Series Paper rectangles to the Whisper White rectangles. Adhere one to the front of the treat holder base and one to the back of the treat holder base.

Stamp Happy Valentine's Day on the 2-1/2" by 3/4" piece of Whisper White cardstock with Fresh Fig ink and punch out with the Classic Label Punch. Adhere the greeting to the right side of the heart tab as shown in the photograph below.

Die cut the top of the party hat from the Celebration Thinlits from the Melon Mambo cardstock.

Stamp the small heart image from Heart Happiness with Melon Mambo ink on the 1/2" circle. Adhere to the Melon Mambo party hat top. Add a dimensional to the back and adhere to the front of the treat holder base in the center of the Painted with Love Designer Series Paper rectangle.

Wrap a Hearshey chocolate nugget with a 1" by 3" piece of Painted with Love Designer Series Paper and glue the ends together. Liquid glue works better here than a dry adhesive. Add a glue dot to the back of the nugget.

Turn the treat holder base over and attach the chocolate candy nugget to the center. Fold up the sides and slide the tabs together to close the treat holder.

The Sweetheart Punch's shape is similar to the dies in the Sweet and Sassy Framelits collection. If you missed the Sweetheart Punch or already have the Sweet and Sassy Framelits, you can still recreate this treat holder.

The second way to recreate this treat holder uses the Big Shot Machine and the Sweet and Sassy Framelits to cut away part of the heart shape. This method is called partial die cutting. Partial die cutting is a way of positioning the acrylic plates so that only a section of the framelit or thinlit is cut. Think of partial die cutting as fussy cutting for the Big Shot Machine.

To partial die cut a framelit or thinlit, place the die on top of the cardstock you wish to cut. Then position the top acrylic plate on top of the area you wish to cut and leave the area you do not wish to cut uncovered by the top acrylic place. Here the edge of the top acrylic plate to lined up with the 3/4" score line.

Then run it through the Big Shot Machine. Repeat for the other end.

The treat holder base should now look like this. The two tops of the hearts are cut and the bottom point is not.

Trim the extra cardstock from the sides of the hearts. Cut the tabs and decorate in the same manner as the first version of this treat holder.

Whether you use a punch or a framelit, this is a sweet treat for your Valentine! I bet this treat holder would look great decorated as a butterfly too! I hope you give this treat holder a try. How would you decorate your treat holder? I would love to see what you make!

Thanks for stopping by!
Beth

Valentine’s Day Treat Holder Two Ways Supply List
Stamps	#145769 Heart Happiness (Photopolymer) #128748 Teeny Tiny Wishes (Wood-Mount) #127802 Teeny Tiny Wishes (Clear-Mount)
Paper	#100730 Whisper White Cardstock #115320 Melon Mambo Cardstock #144242 Fresh Fig Cardstock #145580 Painted with Love Designer Series Paper
Ink	#144082 Fresh Fig Ink Pad #126948 Melon Mambo Ink Pad
Embellishments	#104430 Stampin’ Dimensionals
Tools	#126199 Stampin’ Pierce Mat #143263 Big Shot Machine #141707 Sweet and Sassy Framelits #143703 Celebration Thinlits #141491 Classic Label Punch #133786 Sweetheart Punch (retired) #119869 1/2" Circle Punch #122334 Simply Scored Scoring Tool

Just for You Valentine Treat Tube

The inspiration for this treat tube comes from Mary Lee Carroll. She created a precious treat tube holder last year which she modified from Jennifer.

 
I am using Mary Lee's measurements. I have updated the Designer Series Paper, changed the color palette, and added my own embellishments.

Start with a 2" x 6" piece of Painted with Love Designer Series Paper. Punch one end of the Designer Series Paper with the Scalloped Tag Topper Punch.

Then starting with the other end and with the 6" side along the top of the Simply Scored Scoring Tool,  score at 3/4", 1-1/2", 4", and 4-3/4". This will become the treat holder base.

Thread a 5" piece of Fresh Fig 1/2" Finely Woven Ribbon through the hole at the top of the tag, fold it in half and secure with glue dots. Then tie a bow of Whisper White Baker's Twine around the neck of the Fresh Fig Ribbon.

Burnish the score lines. Fold the treat holder base as follows. Start with end away from the punch - the 3/4" score line - and valley fold. Then mountain fold the 1-1/2" score line. Mountain fold the 4" score line. Lastly, valley fold the 4-3/4" score line.

Die cut the scalloped circle from Powder Pink cardstock. Die cut the circle from Whisper White cardstock using the Layering Circles Framelits. using the Layering Circles Framelits.

Stamp the polka-dotted heart image from Heart Happiness in the center of the Whisper White circle using Fresh Fig ink.

Adhere the Whisper White circle to the Powder Pink scalloped circle.

Stamp the just for you sentiment image from Sure Do Love You on a scrap of Whisper White cardstock with Melon Mambo ink and punch out with the Classic Label Punch. Add dimensionals to the back of the label. Then add a gold enamel circle to both ends of the label. Adhere the label to the center of the Whisper White circle and then to the center panel of the treat holder base (between the 1-1/2" score line and the 4" score line).

Fill the treat tube with M&M's or other candy. Add three glue dots to the center of the treat tube. Carefully, slide the treat tube from the top of the treat holder base to the bottom of the treat holder base. Once the treat tube is in place, press the treat tube against the Designer Series Paper base to secure the treat tube in place.

Treat tubes were one of the products that I was surprised and saddened to see on the Holiday retiring list. Treat tubes are incredibly versatile! They work for a multitude of occasions, all ages, all genders, and can fit all kinds of treats whether it be candy or sunflower seeds. I purchased quite a few boxes before they were gone. Although the treat tubes by themselves are retired, treat tubes are still available in the 2017 September Paper Pumpkin Kit and Refill. I recommend purchasing the kit or the refill while supplies! September's kit was fa-boo-lous!

I love using the Scalloped Tag Topper Punch for making treat holders. It is the perfect width for small treats, fantastic for creating closures, and for attaching embellishments too. What have you created with the Scalloped Tag Topper Punch? I would love to see what you make!

Thanks for stopping by!
Beth

The Purrfect Valentine Treat Holder

I drew my inspiration for this next treat holder from BJ Peters. She created a Halloween Cat Punch treat holder that was so adorable, I had to create one myself!

I used the Painted with Love Designer Series Paper pack as the base of my treat holder. The cat is adorned with a Calypso Coral Ombre Ribbon bow and a gold enamel heart.

 

Start by punching two cats out of Painted with Love Designer Series Paper. I chose the small heart pattern, but all of the patterns in this paper pack would be gorgeous! Make sure to punch one cat with your chosen pattern facing you and one cat with your chosen pattern facing AWAY from you. That way your chosen pattern is facing outwards on both sides of the treat holder.

Essentially, you are creating a mirror image with the Cat Punch.

Then cut a 2-1/2" x 3/4" piece of Painted with Love Designer Series Paper. With the 2-1/2" side along the top of the Simply Scored Scoring Tool at 3/4" and at 1-3/4". Burnish all of the score lines. This piece will connect the two cats and form the base of the treat holder.

Line up the bottom edge of one cat with the bottom edge of the 3/4" score line and adhere in place.

From the side, the treat holder is starting to take on the shape of the letter U.

Add a glue dot to the bottom of a Hershey Kiss and adhere to the center of the treat holder base.

Line with the second cat's ears with the first cat's ears, pinch together while adhering the bottom of the second cat to the other side of the treat holder base.

Adhere the two cat heads together. Tie and attach the Calypso Coral Ombre Ribbon bow to the cat. Then adhere a gold heart enamel shape to the center of the bow.

This treat holder is so quick and easy and uses very little supplies. I made four variations using the Painted with Love Designer Series Paper.

You can create a plethora of treat holders in no time. I think I got a little carried away!

These cuties are ready for delivery! I hope you give these Valentine treat holders a try. How would you decorate your Cat Punch treat holder? I would love to see what you make!

Thanks for stopping by!
Beth

Cat Punch Valentine Treat Holder Supply List
Stamps
Paper	#145580 Painted with Love Designer Series Paper
Ink
Embellishments	#144235 Calypso Coral Ombre Ribbon #134583 1/8” Gold Ribbon #141679 Subtles Enamel Shapes #141678 Metallic Enamel Shapes #141680 Brights Enamel Shapes
Tools	#144666 Cat Punch #103683 Glue Dots® #122334 Simply Scored Scoring Tool